Dental implant
From Wikipedia, the free encyclopedia
This article may require cleanup to meet Wikipedia's quality standards. Please improve this article if you can. (August 2010)
A Straumann-brand root-form endosseous dental implant placed in the site of the maxillary left permanent first molar with bone graft used to elevate the sinus floor
A dental implant is an artificial tooth root used in dentistry to support restorations that resemble a tooth or group of teeth.
Virtually all dental implants placed today are root-form endosseous implants. In other words, virtually all dental implants placed in the 21st century appear similar to an actual tooth root (and thus possess a "root-form") and are placed within the bone (end- being the Greek prefix for "in" and osseous referring to "bone").
Prior to the advent of root-form endosseous implants, most implants were either blade endosseous implants, in that the shape of the metal piece placed within the bone resembled a flat blade, or subperiosteal implants, in which a framework was constructed to lie upon and was attached with screws to the exposed bone of the jaws.
Dental implants can be used to support a number of dental prostheses, including crowns, implant-supported bridges or dentures.
Contents [hide]
1 History
2 Composition
3 Training
4 Surgical procedure
4.1 Surgical planning
4.2 Basic procedure
4.3 Detail procedure
4.4 Surgical incisions
4.5 Healing time
4.6 One-stage, two-stage surgery
4.7 Surgical timing
4.8 Immediate placement
4.9 Use of CT scanning
5 Complementary procedures
6 Considerations
7 Success rates
8 Failure
9 Contraindications
10 Market
11 See also
12 References
13 External links
[edit]History
The Mayan civilization has been shown to have used the earliest known examples of endosseous implants (implants embedded into bone), dating back over 1,350 years before Per-Ingvar Brånemark started working with titanium. While excavating Mayan burial sites in Honduras in 1931, archaeologists found a fragment of mandible of Mayan origin, dating from about 600 AD. This mandible, which is considered to be that of a woman in her twenties, had three tooth-shaped pieces of shell placed into the sockets of three missing lower incisor teeth. For forty years the archaeological world considered that these shells were placed after death in a manner also observed in the ancient Egyptians. However, in 1970 a Brazilian dental academic, Professor Amadeo Bobbio studied the mandibular specimen and took a series of radiographs. He noted compact bone formation around two of the implants which led him to conclude that the implants were placed during life.
In the 1950s research was being conducted at Cambridge University in England to study blood flow in vivo. These workers devised a method of constructing a chamber of titanium which was then embedded into the soft tissue of the ears of rabbits. In 1952 the Swedish orthopaedic surgeon, P I Brånemark, was interested in studying bone healing and regeneration, and adopted the Cambridge designed ‘rabbit ear chamber’ for use in the rabbit femur. Following several months of study he attempted to retrieve these expensive chambers from the rabbits and found that he was unable to remove them. Per Brånemark observed that bone had grown into such close proximity with the titanium that it effectively adhered to the metal. Brånemark carried out many further studies into this phenomenon, using both animal and human subjects, which all confirmed this unique property of titanium.
Meanwhile an Italian medical doctor called Stefano Melchiade Tramonte, understood that titanium could be used for dental restorations and after designing a titanium screw to support his own dental prosthesis, started to use it on many patients in his clinic in 1959. The good results of his clinical studies on humans were published in 1966.[1]
Although Brånemark had originally considered that the first work should centre on knee and hip surgery, he finally decided that the mouth was more accessible for continued clinical observations and the high rate of edentulism in the general population offered more subjects for widespread study. He termed the clinically observed adherence of bone with titanium as ‘osseointegration’. In 1965 Brånemark, who was by then the Professor of Anatomy at Gothenburg University in Sweden, placed his first titanium dental implant into a human volunteer, a Swede named Gösta Larsson.
Contemporaneous independent research in the United States by Stevens and Alexander led to a 1969 US patent filing for titanium dental implants.[2]
Over the next fourteen years Brånemark published many studies on the use of titanium in dental implantology until in 1978 he entered into a commercial partnership with the Swedish defense company, Bofors AB for the development and marketing of his dental implants. With Bofors (later to become Nobel Industries) as the parent company, Nobelpharma AB (later to be renamed Nobel Biocare) was founded in 1981 to focus on dental implantology. To the present day over 7 million Brånemark System implants have now been placed and hundreds of other companies produce dental implants. The majority of dental implants currently available are shaped like small screws, with either tapered or parallel sides. They can be placed at the same time as a tooth is removed by engaging with the bone of the socket wall and sometimes also with the bone beyond the tip of the socket. Current evidence suggests that implants placed straight into an extraction socket have comparable success rates to those placed into healed bone.[3] The success rate and radiographic results of immediate restorations of dental implants placed in fresh extraction sockets (the temporary crowns placed at the same time) have been shown to be comparable to those obtained with delayed loading (the crowns placed weeks or months later) in carefully selected cases[4]
Some current research in dental implantology is focusing on the use of ceramic materials such as zirconia (ZrO2) in the manufacture of dental implants. Zirconia is the dioxide of zirconium, a metal close to titanium in the periodic table and with similar biocompatability properties.[5] Although generally the same shape as titanium implants, zirconia, which has been used successfully for orthopaedic surgery for a number of years, has the advantage of being more cosmetically aesthetic owing to its bright tooth-like colour.[6] However, long-term clinical data is necessary before one-piece ZrO2 implants can be recommended for daily practice.[7]
[edit]Composition
A typical implant consists of a titanium screw (resembling a tooth root) with a roughened or smooth surface. The majority of dental implants are made out of commercially pure titanium, which is available in 4 grades depending upon the amount of carbon and iron contained.[8] More recently grade 5 titanium has increased in use. Grade 5 titanium, Titanium 6AL-4V, (signifying the Titanium alloy containing 6% Aluminium and 4% Vanadium alloy) is believed to offer similar osseointegration levels as commercially pure titanium. Ti-6Al-4V alloy offers better tensile strength and fracture resistance. Today most implants are still made out of commercially pure titanium (grades 1 to 4) but some implant systems (Endopore and NanoTite) are fabricated out of the Ti-6Al-4V alloy.[9] Implant surfaces may be modified by plasma spraying, anodizing,[10] etching or sandblasting to increase the surface area and the integration potential of the implant.
[edit]Training
Implant surgery may be performed as an outpatient under general anesthesia, oral conscious sedation, nitrous oxide sedation, intravenous sedation or under local anesthesia by trained and certified clinicians including general dentists, oral surgeons, prosthodontists, and periodontists.
The legal training requirements for dentists who carry out implant treatment differ from country to country. In the UK implant dentistry is considered by the General Dental Council to be a postgraduate sphere of dentistry. In other words it is not sufficiently covered during the teaching of the university dental degree course and dentists wishing to practice in dental implantology legally need to undergo additional formal postgraduate training. The General Dental Council has published strict guidelines on the training required for a dentist to be able to place dental implants in general dental practice.[11] UK dentists need to complete a competency assessed postgraduate extended learning program before providing implant dentistry to patients.
The degree to which both graduate and post-graduate dentists receive training in the surgical placement of implants varies from country to country,[12][13][14] but it seems likely that lack of formal training will lead to higher complication rates.[15]
[edit]Surgical procedure
[edit]Surgical planning
Prior to commencement of surgery, careful and detailed planning is required to identify vital structures such as the inferior alveolar nerve or the sinus, as well as the shape and dimensions of the bone to properly orient the implants for the most predictable outcome. Two-dimensional radiographs, such as orthopantomographs or periapicals are often taken prior to the surgery. In most instances, a CT scan will also be obtained. Specialized 3D CAD/CAM computer programs may be used to plan the case.
Whether CT-guided or manual, a 'stent' may sometimes be required to facilitate the placement of implants. A surgical stent is an acrylic wafer that fits over either the teeth, the bone surface or the mucosa (when all the teeth are missing) with pre-drilled holes to show the position and angle of the implants to be placed. The surgical stent may be produced using stereolithography following computerized planning of a case from the CT scan.
[edit]Basic procedure
In its most basic form the placement of an osseointegrated implant requires a preparation into the bone using either hand osteotomes or precision drills with highly regulated speed[16] to prevent burning or pressure necrosis of the bone. After a variable amount of time to allow the bone to grow on to the surface of the implant (osseointegration) a tooth or teeth can be placed on the implant. The amount of time required to place an implant will vary depending on the experience of the practitioner, the quality and quantity of the bone and the difficulty of the individual situation.
[edit]Detail procedure
At edentulous (without teeth) jaw sites, a pilot hole is bored into the recipient bone, taking care to avoid the vital structures (in particular the inferior alveolar nerve or IAN and the mental foramen within the mandible). Drilling into jawbone usually occurs in several separate steps. The pilot hole is expanded by using progressively wider drills (typically between three and seven successive drilling steps, depending on implant width and length). Care is taken not to damage the osteoblast or bone cells by overheating. A cooling saline or water spray keeps the temperature of the bone to below 47 degrees Celsius (approximately 117 degrees Fahrenheit). The implant screw can be self-tapping, and is screwed into place at a precise torque so as not to overload the surrounding bone (overloaded bone can die, a condition called osteonecrosis, which may lead to failure of the implant to fully integrate or bond with the jawbone). Typically in most implant systems, the osteotomy or drilled hole is about 1mm deeper than the implant being placed, due to the shape of the drill tip. Surgeons must take the added length into consideration when drilling in the vicinity of vital structures.
[edit]Surgical incisions
Traditionally, an incision is made over the crest of the site where the implant is to be placed. This is referred to as a 'flap'. Some systems allow for 'flapless' surgery where a piece of mucosa is punched-out from over the implant site. Proponents of 'flapless' surgery believe that it decreases recovery time while its detractors believe it increases complication rates because the edge of bone cannot be visualized.[17][18] Because of these visualization problems flapless surgery is often carried out using a surgical guide constructed following computerized 3D planning of a pre-operative CT scan.
[edit]Healing time
The amount of time required for an implant to become osseointegrated is a hotly debated topic.[19] Consequently the amount of time that practitioners allow the implant to heal before placing a restoration on it varies widely. In general, practitioners allow 2–6 months for healing but preliminary studies show that early loading of implant may not increase early or long term complications.[20] If the implant is loaded too soon, it is possible that the implant may move which results in failure. The subsequent time to heal, possibly graft and eventually place a new implant may take up to eighteen months. For this reason many are reluctant to push the envelope for healing.
[edit]One-stage, two-stage surgery
When an implant is placed either a 'healing abutment', which comes through the mucosa, is placed or a 'cover screw' which is flush with the surface of the dental implant is placed. When a cover screw is placed the mucosa covers the implant while it integrates then a second surgery is completed to place the healing abutment.
Two-stage surgery is sometimes chosen when a concurrent bone graft is placed or surgery on the mucosa may be required for esthetic reasons. Some implants are one piece so that no healing abutment is required.
In carefully selected cases, patients can be implanted and restored in a single surgery, in a procedure labeled "Immediate Loading". In such cases a provisional prosthetic tooth or crown is shaped to avoid the force of the bite transferring to the implant while it integrates with the bone.
[edit]Surgical timing
There are different approaches to place dental implants after tooth extraction. The approaches are:
Immediate post-extraction implant placement.
Delayed immediate post-extraction implant placement (2 weeks to 3 months after extraction).
Late implantation (3 months or more after tooth extraction).
According to the timing of loading of dental implants, the procedure of loading could be classified into:
Immediate loading procedure.
Early loading (1 week to 12 weeks).
Delayed loading (over 3 months)
[edit]Immediate placement
An increasingly common strategy to preserve bone and reduce treatment times includes the placement of a dental implant into a recent extraction site. In addition, immediate loading is becoming more common as success rates for this procedure are now acceptable. This can cut months off the treatment time and in some cases a prosthetic tooth can be attached to the implants at the same time as the surgery to place the dental implants.
Most data suggests that when placed into single rooted tooth sites with healthy bone and mucosa around them, the success rates are comparable to that of delayed procedures with no additional complications.[21]
[edit]Use of CT scanning
When computed tomography, also called cone beam computed tomography or CBCT (3D X-ray imaging) is used preoperatively to accurately pinpoint vital structures including the inferior alveolar canal, the mental foramen, and the maxillary sinus, the chances of complications are dramatically reduced as is chairtime and number of visits.[22] Cone beam CT scanning, when compared to traditional medical CT scanning, utilizes less than 2% of the radiation, provides more accuracy in the area of interest, and is safer for the patient.[23] CBCT allows the surgeon to create a surgical guide, which allows the surgeon to accurately angle the implant into the ideal space, increasing success rates and decreasing post-operative healing.[24]
[edit]Complementary procedures
Sinus lifting is a common surgical intervention. A dentist or specialist with proper training such as a periodontist, prosthodontist, or oral surgeon thickens the inadequate part of atrophic maxilla towards the sinus with the help of bone transplantation or bone expletive substance. This results in more volume for a better quality bone site for the implantation. Prudent clinicians who wish to avoid placement of implants into the sinus cavity pre-plan sinus lift surgery using the precision diagnostic guidance afforded by a 3D CBCT X-ray, as in the case of posterior mandibular implants discussed earlier.
Bone grafting will be necessary in cases where there is a lack of adequate maxillary or mandibular bone in terms of front to back (lip to tongue) depth or thickness; top to bottom height; and left to right width. Sufficient bone is needed in three dimensions to securely integrate with the root-like implant. Improved bone height—which is very difficult to achieve—is particularly important to assure ample anchorage of the implant's root-like shape because it has to support the mechanical stress of chewing, just like a natural tooth.
Typically, implantologists try to place implants at least as deeply into bone as the crown or tooth will be above the bone. This is called a 1:1 crown to root ratio. This ratio establishes the target for bone grafting in most cases. If 1:1 or better cannot be achieved, the patient is usually advised that only a short implant can be placed and to not expect a long period of usability.
A wide range of grafting materials and substances may be used during the process of bone grafting / bone replacement. They include the patient's own bone (autograft), which may be harvested from the hip (iliac crest) or from spare jawbone; processed bone from cadavers (allograft); bovine bone or coral (xenograft); or artificially produced bone-like substances (calcium sulfate with names like Regeneform; and hydroxyapatite or HA, which is the primary form of calcium found in bone). The HA is effective as a substrate for osteoblasts to grow on. Some implants are coated with HA for this reason, although the bone forming properties of many of these substances is a hotly debated topic in bone research groups. Alternatively the bone intended to support the implant can be split and widened with the implant placed between the two halves like a sandwich. This is referred to as a 'ridge split' procedure.
Bone graft surgery has its own standard of care. In a typical procedure, the clinician creates a large flap of the gingiva or gum to fully expose the jawbone at the graft site, performs one or several types of block and onlay grafts in and on existing bone, then installs a membrane designed to repel unwanted infection-causing microbiota found in the oral cavity. Then the mucosa is carefully sutured over the site. Together with a course of systemic antibiotics and topical antibacterial mouth rinses, the graft site is allowed to heal (several months).
The clinician typically takes a new radiograph to confirm graft success in width and height, and assumes that positive signs in these two dimensions safely predict success in the third dimension; depth. Where more precision is needed, usually when mandibular implants are being planned, a 3D or cone beam radiograph may be called for at this point to enable accurate measurement of bone and location of nerves and vital structures for proper treatment planning. The same radiographic data set can be employed for the preparation of computer-designed placement guides.
Correctly performed, a bone graft produces live vascular bone which is very much like natural jawbone and is therefore suitable as a foundation for implants.
[edit]Considerations
For dental implant procedure to work, there must be enough bone in the jaw, and the bone has to be strong enough to hold and support the implant. If there is not enough bone, more may need to be added with a bone graft procedure discussed earlier. Sometimes, this procedure is called bone augmentation. In addition, natural teeth and supporting tissues near where the implant will be placed must be in good health.
In all cases careful consideration must be given to the final functional aspects of the restoration, such as assessing the forces which will be placed on the implant. Implant loading from chewing and parafunction (abnormal grinding or clenching habits) can exceed the biomechanic tolerance of the implant bone interface and/or the titanium material itself, causing failure. This can be failure of the implant itself (fracture) or bone loss, a "melting" or resorption of the surrounding bone.
The dentist must first determine what type of prosthesis will be fabricated. Only then can the specific implant requirements including number, length, diameter, and thread pattern be determined. In other words, the case must be reverse engineered by the restoring dentist prior to the surgery. If bone volume or density is inadequate, a bone graft procedure must be considered first. The restoring dentist may consult with the periodontist, endodontist, oral surgeon, or another trained general dentist to co-treat the patient. Usually, physical models or impressions of the patient's jawbones and teeth are made by the restorative dentist at the implant surgeons request, and are used as physical aids to treatment planning. If not supplied, the implant surgeon makes his own or relies upon advanced computer-assisted tomography or a cone beam CT scan to achieve the proper treatment plan.
Computer simulation software based on CT scan data allows virtual implant surgical placement based on a barium impregnated prototype of the final prosthesis. This predicts vital anatomy, bone quality, implant characteristics, the need for bone grafting, and maximizing the implant bone surface area for the treatment case creating a high level of predictability. Computer CAD/CAM milled or stereolithography based drill guides can be developed for the implant surgeon to facilitate proper implant placement based on the final prosthesis' occlusion and aesthetics.
Treatment planning software can also be used to demonstrate "try-ins" to the patient on a computer screen. When options have been fully discussed between patient and surgeon, the same software can be used to produce precision drill guides. Specialized software applications such as 'SimPlant' (simulated implant) or 'NobelGuide' use the digital data from a patient's CBCT to build a treatment plan. A data set is then produced and sent to a lab for production of a precision in-mouth drilling guide.[25]
[edit]Success rates
Dental implant success is related to operator skill, quality and quantity of the bone available at the site, and the patient's oral hygiene. The consensus is that implants carry a success rate of around 95%[26]
One of the most important factors that determine implant success is the achievement and maintenance of implant stability.[27] The stability is presented as an ISQ (Implant Stability Quotient) value. Other contributing factors to the success of dental implant placement, as with most surgical procedures, include the patient's overall general health and compliance with post-surgical care.
[edit]Failure
Failure of a dental implant is often related to failure to osseointegrate correctly. A dental implant is considered to be a failure if it is lost, mobile or shows peri-implant (around the implant) bone loss of greater than 1.0 mm in the first year and greater than 0.2mm a year after.
Dental implants are not susceptible to dental caries but they can develop a condition called peri-implantitis. This is an inflammatory condition of the mucosa and/or bone around the implant which may result in bone loss and eventual loss of the implant. The condition is usually, but not always, associated with a chronic infection. Peri-implantitis is more likely to occur in heavy smokers, patients with diabetes, patients with poor oral hygiene and cases where the mucosa around the implant is thin.[28]
Currently there is no universal agreement on the best treatment for peri-implantitis. The condition and its causes is still poorly understood.[29]
Risk of failure is increased in smokers. For this reason implants are frequently placed only after a patient has stopped smoking as the treatment is very expensive. More rarely, an implant may fail because of poor positioning at the time of surgery, or may be overloaded initially causing failure to integrate. If smoking and positioning problems exist prior to implant surgery, clinicians often advise patients that a bridge or partial denture rather than an implant may be a better solution.
Failure may also occur independently of the causes outlined above. Implants like any other object suffers from wear and tear. If the implants in question are replacing commonly used teeth, then these may suffer from wear and tear and after years may crack and break up. This is a very rare occurrence, however possible. The only way to minimize the risk of this happening is to visit your dentist for regular reviews.
In the majority of cases where an implant fails to integrate with the bone and is rejected by the body the cause is unknown. This may occur in around 5% of cases. To this day we still do not know why bone will integrate with titanium dental implants and why it does not reject the material as a 'foreign body'. Many theories have been postulated over the last five decades. A recent theory argues that rather than being an active biological tissue response, the integration of bone with an implant is the lack of a negative tissue response. In other word for unknown reasons the usual response of the body to reject foreign objects implanted into it does not function correctly with titanium implants. It has further been postulated that an implant rejection occurs in patients whose bone tissues actually react as they naturally should with the 'foreign body' and reject the implant in the same manner that would occur with most other implanted materials.[30]
[edit]Contraindications
There are few absolute contraindications to implant dentistry. However there are some systemic, behavioral and anatomic considerations that should be assessed.
Particularly for mandibular (lower jaw) implants, in the vicinity of the mental foramen (MF), there must be sufficient alveolar bone above the mandibular canal also called the inferior alveolar canal or IAC (which acts as the conduit for the neurovascular bundle carrying the inferior alveolar nerve or IAN).
Failure to precisely locate the IAN and MF invites surgical insult by the drills and the implant itself. Such insult may cause irreparable damage to the nerve, often felt as a paresthesia (numbness) or dysesthesia (painful numbness) of the gum, lip and chin. This condition may persist for life and may be accompanied by unconscious drooling.
Uncontrolled type II diabetes is a significant relative contraindication as healing following any type of surgical procedure is delayed due to poor peripheral blood circulation. Anatomic considerations include the volume and height of bone available. Often an ancillary procedure known as a block graft or sinus augmentation are needed to provide enough bone for successful implant placement.
There is new information about intravenous and oral bisphosphonates (taken for certain forms of breast cancer and osteoporosis, respectively) which may put patients at a higher risk of developing a delayed healing syndrome called osteonecrosis. Implants are contraindicated for some patients who take intravenous bisphosphonates.
The many millions of patients who take an oral bisphosphonate (such as Actonel, Fosamax and Boniva) may sometimes be advised to stop the administration prior to implant surgery, then resume several months later. However, current evidence suggests that this protocol may not be necessary. As of January, 2008, an oral bisphosphonate study reported in the February 2008 Journal of Oral and Maxillofacial Surgery, reviewing 115 cases that included 468 implants, concluded "There is no evidence of bisphosphonate-associated osteonecrosis of the jaw in any of the patients evaluated in the clinic and those contacted by phone or e-mail reported no symptoms."[31]
The American Dental Association had addressed bisphosphonates in an article entitled "Bisphosphonate medications and your oral health,"[32] In an Overview, the ADA stated "The risk of developing BON [bisphosphonate-associated osteonecrosis of the jaw] in patients on oral bisphosphonate therapy appears to be very low...". The ADA Council on Scientific Affairs also employed a panel of experts who issued recommendations [for clinicians] for treatment of patients on oral bisphosphonates, published in June, 2006. The overview may be read online at ada.org but it has now been superseded by a huge study—encompassing over 700,000 cases—entitled "Bisphosphonate Use and the Risk of Adverse Jaw Outcomes." Like the 2008 JOMS study, the ADA study exonerates oral bisphosphonates as a contraindication to dental implants.[33]
Bruxism (tooth clenching or grinding) is another consideration which may reduce the prognosis for treatment. The forces generated during bruxism are particularly detrimental to implants while bone is healing; micromovements in the implant positioning are associated with increased rates of implant failure. Bruxism continues to pose a threat to implants throughout the life of the recipient.[34] Natural teeth contain a periodontal ligament allowing each tooth to move and absorb shock in response to vertical and horizontal forces. Once replaced by dental implants, this ligament is lost and teeth are immovably anchored directly into the jaw bone. This problem can be minimized by wearing a custom made mouthguard (such an NTI appliance) at night.
Postoperatively, after implants have been placed, there are physical contraindications that prompt rapid action by the implantology team. Excessive or severe pain lasting more than three days is a warning sign, as is excessive bleeding. Constant numbness of the gingiva (gum), lip and chin—usually noticed after surgical anesthesia wears off—is another warning sign. In the latter case, which may be accompanied by severe constant pain, the standard of care calls for diagnosis to determine if the surgical procedure insulted the IAN. A 3D cone beam X-ray provides the necessary data, but even before this step a prudent implantologist may back out or completely remove an implant in an effort to restore nerve function because delay is usually ineffective. Depending upon the evidence visible with a 3D X-ray, patients may be referred to a specialist in nerve repair. In all cases, speed in diagnosis and treatment are necessary.
[edit]Market
In the United States and the United Kingdom, there is no exclusive specialty in 'implantology'.
Any practitioner who carries out implant treatment, whether in the surgical insertion or the final provision of the prosthesis, must be adequately trained. Legal training requirements differ between countries.
In 2008, in the UK the General Dental Council (GDC) laid down strict training requirements[35] for dentists involved in dental implantology. Any dentist in the UK who wishes to train in the field of dental implantology must take part in an extended learning program which covers a detailed theory syllabus, as approved by the GDC,[36] in addition to formal supervised surgical training and mentoring. Dentists must not take part in implant dentistry in the UK until they have been approved by the training provider as having passed a formal competency assessment. Failure to comply with the GDC regulations may result in a dentist being removed from the Dental Register and hence losing the right to practice dentistry in the UK.[37]
[edit]See also
Periodontist
Oral and maxillofacial surgery
Bone grafts in Dental Implantology
Dental bridge
Osseointegration
Dental tourism
Gold teeth
American Association of Oral and Maxillofacial Surgeons
European Association for Osseointegration
British Society of Oral Implantology
[edit]References
^ Annali di Stomatologia - Su alcuni casi particolarmente interessanti di impianto endosseo con vite autofilettante - Vol XV - Aprile 1966
^ US patent 3579831, Stevens, Irving J.; Alexander, Jerry, "Bone Implant", granted 1971-05-25
^ Quirynen M, Van Assche N, Botticelli D, Berglundh T (2007). "How does the timing of implant placement to extraction affect outcome?". The International Journal of Oral & Maxillofacial Implants 22 Suppl: 203–23. PMID 18437797.
^ Crespi R, Capparé P, Gherlone E, Romanos GE (2008). "Immediate versus delayed loading of dental implants placed in fresh extraction sockets in the maxillary esthetic zone: a clinical comparative study". The International Journal of Oral & Maxillofacial Implants 23 (4): 753–8. PMID 18807574.
^ Gahlert M, Röhling S, Wieland M, Sprecher CM, Kniha H, Milz S (November 2009). "Osseointegration of zirconia and titanium dental implants: a histological and histomorphometrical study in the maxilla of pigs". Clinical Oral Implants Research 20 (11): 1247–53. doi:10.1111/j.1600-0501.2009.01734.x. PMID 19531104.
^ Depprich R, Zipprich H, Ommerborn M, et al. (2008). "Osseointegration of zirconia implants: an SEM observation of the bone-implant interface". Head & Face Medicine 4: 25. doi:10.1186/1746-160X-4-25. PMID 18990214.
^ Andreiotelli M, Kohal RJ (June 2009). "Fracture strength of zirconia implants after artificial aging". Clinical Implant Dentistry and Related Research 11 (2): 158–66. doi:10.1111/j.1708-8208.2008.00105.x. PMID 18657150.
^ Arturo N. Natali (ed.) (2003). "Dental Biomechanics". Taylor & Francis, London / New York, 273 pp., ISBN 9-780-415-30666-9, pp. 69-87.
^ Osseointegration, Zard et al. Quintessence 2009.[verification needed]
^ Palmer R (March 2007). "Ti-unite dental implant surface may be superior to machined surface in replacement of failed implants". The Journal of Evidence-based Dental Practice 7 (1): 8–9. doi:10.1016/j.jebdp.2006.12.001. PMID 17403502.
^ General Dental Council (October 30, 2008). "Doing implants? Make sure you’re up to scratch, warns GDC". Press release. Retrieved 2010-03-25.
^ Melo MD, McGann G, Obeid G (December 2007). "Survey of implant training in oral and maxillofacial surgery residency programs in the United States". Journal of Oral and Maxillofacial Surgery 65 (12): 2554–8. doi:10.1016/j.joms.2007.06.685. PMID 18022483.
^ Jokstad A (July 2008). "Where can I learn how to place dental implants? Perspectives from Scandinavia and Canada". International Journal of Oral and Maxillofacial Surgery 37 (7): 593–6. doi:10.1016/j.ijom.2007.12.009. PMID 18295450.
^ Addy LD, Lynch CD, Locke M, Watts A, Gilmour AS (December 2008). "The teaching of implant dentistry in undergraduate dental schools in the United Kingdom and Ireland". British Dental Journal 205 (11): 609–14. doi:10.1038/sj.bdj.2008.1027. PMID 19079107.
^ Binon PP (July 2007). "Treatment planning complications and surgical miscues". Journal of Oral and Maxillofacial Surgery 65 (7 Suppl 1): 73–92. doi:10.1016/j.joms.2007.03.014. PMID 17586352.
^ Brisman DL (1996). "The effect of speed, pressure, and time on bone temperature during the drilling of implant sites". The International Journal of Oral & Maxillofacial Implants 11 (1): 35–7. PMID 8820120.
^ Berdougo M, Fortin T, Blanchet E, Isidori M, Bosson JL (February 2009). "Flapless Implant Surgery Using an Image-Guided System. A 1- to 4-Year Retrospective Multicenter Comparative Clinical Study". Clinical Implant Dentistry and Related Research 12 (2): 142–52. doi:10.1111/j.1708-8208.2008.00146.x. PMID 19220842.
^ Becker W, Goldstein M, Becker BE, Sennerby L, Kois D, Hujoel P (February 2009). "Minimally invasive flapless implant placement: follow-up results from a multicenter study". Journal of Periodontology 80 (2): 347–52. doi:10.1902/jop.2009.080286. PMID 19186977.
^ Gerds TA, Vogeler M (December 2005). "Endpoints and survival analysis for successful osseointegration of dental implants". Statistical Methods in Medical Research 14 (6): 579–90. doi:10.1191/0962280205sm420oa. PMID 16355545.
^ Fischer K, Stenberg T, Hedin M, Sennerby L (May 2008). "Five-year results from a randomized, controlled trial on early and delayed loading of implants supporting full-arch prosthesis in the edentulous maxilla". Clinical Oral Implants Research 19 (5): 433–41. doi:10.1111/j.1600-0501.2007.01510.x. PMID 18371094.
^ Bhola M, Neely AL, Kolhatkar S (October 2008). "Immediate implant placement: clinical decisions, advantages, and disadvantages". Journal of Prosthodontics 17 (7): 576–81. doi:10.1111/j.1532-849X.2008.00359.x. PMID 18761580.
^ Spector L (October 2008). "Computer-aided dental implant planning". Dental Clinics of North America 52 (4): 761–75, vi. doi:10.1016/j.cden.2008.05.004. PMID 18805228.
^ Ludlow JB (November 2008). "Regarding 'Influence of CBCT exposure conditions on radiation dose'". Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontics 106 (5): 627–8; author reply 628–9. doi:10.1016/j.tripleo.2008.06.031. PMID 18801676.
^ Viegas VN, Dutra V, Pagnoncelli RM, de Oliveira MG (January 2010). "Transference of virtual planning and planning over biomedical prototypes for dental implant placement using guided surgery". Clinical Oral Implants Research 21 (3): 290–5. doi:10.1111/j.1600-0501.2009.01833.x. PMID 20074239.
^ http://www.materialise.com/materialise/view/en/554529-SurgiGuide.html
^ Esposito M, Grusovin MG, Willings M, Coulthard P, Worthington HV (2007). "The effectiveness of immediate, early, and conventional loading of dental implants: a Cochrane systematic review of randomized controlled clinical trials". The International Journal of Oral & Maxillofacial Implants 22 (6): 893–904. PMID 18271370.
^ Albrektsson T, Zarb GA (1993). "Current interpretations of the osseointegrated response: clinical significance". The International Journal of Prosthodontics 6 (2): 95–105. PMID 8329101.
^ Fransson C, Wennström J, Tomasi C, Berglundh T (April 2009). "Extent of peri-implantitis-associated bone loss". Journal of Clinical Periodontology 36 (4): 357–63. doi:10.1111/j.1600-051X.2009.01375.x. PMID 19426183.
^ Pye AD, Lockhart DE, Dawson MP, Murray CA, Smith AJ (June 2009). "A review of dental implants and infection". The Journal of Hospital Infection 72 (2): 104–10. doi:10.1016/j.jhin.2009.02.010. PMID 19329223.
^ Mavrogenis AF, Dimitriou R, Parvizi J, Babis GC (2009). "Biology of implant osseointegration". Journal of Musculoskeletal & Neuronal Interactions 9 (2): 61–71. PMID 19516081.
^ Grant BT, Amenedo C, Freeman K, Kraut RA (February 2008). "Outcomes of placing dental implants in patients taking oral bisphosphonates: a review of 115 cases". Journal of Oral and Maxillofacial Surgery 66 (2): 223–30. doi:10.1016/j.joms.2007.09.019. PMID 18201600.
^ "Bisphosphonate medications and your oral health". Journal of the American Dental Association 137 (7): 1048. July 2006. PMID 16803833.
^ Cartsos VM, Zhu S, Zavras AI (January 2008). "Bisphosphonate use and the risk of adverse jaw outcomes: a medical claims study of 714,217 people". Journal of the American Dental Association 139 (1): 23–30. PMID 18167381.
^ McCoy G (2002). "Recognizing and managing parafunction in the reconstruction and maintenance of the oral implant patient". Implant Dentistry 11 (1): 19–27. PMID 11915541.
^ http://www.gdc-uk.org/Our+work/Education+and+quality+assurance/Policy+statement+on+implantology.htm
^ Training Standards in Implant Dentistry. The Royal College of Surgeons of England; London 2008[page needed]
^ Policy Statement on Implant Dentistry. The General Dental Council; London. 9th April 2008[page needed]
[edit]External links
This article's use of external links may not follow Wikipedia's policies or guidelines. Please improve this article by removing excessive and inappropriate external links or by converting links into footnote references. (February 2010)
OsseoNews Expert Discussions on Dental Implants
American Academy of Implant Dentistry
Academy of Osseointegration, professional association of implant dentists
ITI:International Team for Implantology, professional association of implant dentists
American Academy of Periodontology, dental implants guide
Association of Dental Implantology UK
Implant Dentistry
American Dental Implant Association
International Congress of Oral Implantologists
South African Society for Periodontology
Dental Implants Before and After
Journal of Implant and Advanced Clinical Dentistry
Journal of Dental Implantology
Encyclopedia about Dental Implants in Russian
Nelson S, Thomas G (May 2009). "Bacterial Persistence in Dentoalveolar Bone Following Extraction: A Microbiological Study and Implications for Dental Implant Treatment". Clinical Implant Dentistry and Related Research. doi:10.1111/j.1708-8208.2009.00165.x. PMID 19438939.
Website for determining implants from just a radiograph
[hide]
v • d • e
Dentistry
Recognized Specialties
(in the United States)
Endodontics - Oral and Maxillofacial Pathology - Oral and Maxillofacial Radiology - Oral and Maxillofacial Surgery - Orthodontics and Dentofacial Orthopedics - Pediatric Dentistry - Periodontics - Prosthodontics - Dental public health
Unrecognized Specialties
(in the United States)
Cosmetic Dentistry - Dental Implantology - Temporomandibular Joint Disorder - Geriatric dentistry - Restorative Dentistry - Forensic Odontology - Dental Traumatology
Procedures
Dental extraction - Tooth filling - Root canal therapy - Root end surgery - Scaling and root planing - Teeth cleaning -Tooth bonding - Tooth polishing - Tooth bleaching
See also
List of oral health and dental topics - List of basic dentistry topics - Oral hygiene - Dental instruments - Restorative materials
M: TTH
anat/devp/phys
noco/cong/jaws/tumr, epon, injr
dent, proc (orth, pros, endo)
Categories: Dentistry | Implants | Restorative dentistry | Prosthetics | Oral surgery | Oral and maxillofacial surgery | Medical technology
comment4, allegra d tablet sa, 1459, singulair and allegra together, hvjsnt, allegra 180 mg side effects, ytupgw, david allegra m d, toxv, allegra lynne condon, >:[[[, food allergy allegra, zrpxx, allegra gellar rock idle, jfitn, allegra print 26 imagining, huhwh, stefania allegra, 21757, john gianola allegra, =)),
Posted by: jonn2 | 07/08/2011 at 04:15 AM
comment2, altace patient assistance, %-(, psvt altace, 834, purchase altace pharmacy rx on line, qqj, side effects of altace, dpvqim, altace natural alternative, pgxxb, altace lawsuit, 8]], generic altace patent, wflhm, best price for altace, 52734, altace palpitations, =-[[[, altace comparable, 8728,
Posted by: jonn2 | 07/08/2011 at 05:01 AM
civil rights social networks http://facesepicentre.com/ social network lgbt guerilla marketing social networks
Posted by: prarApept | 12/27/2011 at 05:09 AM
Hello! lexapro reviews, generic lipitor, diovan generic, wellbutrin generic, zithromax generic.
Posted by: Werseraxagera | 02/10/2012 at 06:06 AM